Back to Top

Hi, Guest!

  LOKASI :  Kota Administrasi Jakarta Barat

Bergabung Selama :

BAGIKAN :   

Bagikan :

Flow meter Aquametro VZO 20

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
1 Unit
Dilihat Sebanyak
:
14 kali

Harga

CALL
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.

Detail Flow Meter Aquametro VZO 20

Product Information Aquametro Flow meter  VZO 20

 

Oil meters with mechanical roller counter, and with BSP Threaded Fittings

 

Not approved for resale use

 

Reed switch RV or inductive pulser IN (NAMUR IEC 60947-5-6) are also available. Please email for prices and datasheet if required

 

Suitable for Fuel Types;

 

  • Heating Fuel, Extra Light / Light / Medium / Heavy (DN20 or above)
  • Kerosene
  • Naphtha
  • Diesel
  • Petrol
  • Lubricating Oils

 

Your Benefits

 

  • High operational safety due to vibration resistance
  • Space saving installation without requirement of straight inlet and outlet paths
  • Easy to install without restriction either horizontally, vertically or inclined
  • High operational safety due to integral safety filter in the meter inlet. Reduces effort on start-up

 

Meters for heavy fuel oil should have a nominal diameter of DN 20 or larger

 

All threaded meters from 1/2″DN15, to 1.5″DN40 are supplied complete with BSP threaded Brass Adaptors, which enable the meter to be removed easily should it require inspection / testing. These fittings also enable the meter to be orientated in the desired plane. These fittings are not available for 2″DN50 Meters. Fittings shown below;

IMPORTANT – All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty. Oilybits can supply Inline Brass Y-Strainers with a cage supported 100 Micron Stainless Steel Mesh cloth, prices at foot of lising.

 

Specification       VZO 20     VZO 20             Nominal Diameter     : 20 mm / 3/4″     Installation Length     : 165 mm     Connection Threads     : 3/4″ BSP     Nominal Pressure – Threaded     : 16 Bar     Maximum Temperature     : +130 or +180 Celcius     Maximum Flow Rate     : 1,500 lph     Continuous Flow Rate     : 1,000 lph     Minimum Flow Rate     : 30 lph     Approx Starting Flowrate     : 12 lph     Maximum Permissible Error     : ±1.0% of reading     Smallest Readable Amount     : 0.1 Litres     Registration Capacity     : 10,000 Litres     Safety Filter Mesh Size     : 400 Micron     Dirt Filter Mesh Size     : 400 Micron     Volume of Measuring Chamber     : 36 cm3     Ingress Protection     : IP65    

 

Tampilkan Lebih Banyak