Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
Oil meters with mechanical roller counter, and with BSP Threaded Fittings
Not approved for resale use
Reed switch RV or inductive pulser IN (NAMUR IEC 60947-5-6) are also available. Please email for prices and datasheet if required
Suitable for Fuel Types;
Your Benefits
Meters for heavy fuel oil should have a nominal diameter of DN 20 or larger
All threaded meters from 1/2″DN15, to 1.5″DN40 are supplied complete with BSP threaded Brass Adaptors, which enable the meter to be removed easily should it require inspection / testing. These fittings also enable the meter to be orientated in the desired plane. These fittings are not available for 2″DN50 Meters. Fittings shown below;
IMPORTANT – All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty. Oilybits can supply Inline Brass Y-Strainers with a cage supported 100 Micron Stainless Steel Mesh cloth, prices at foot of lising.
Specification VZO 40 VZO 40 Nominal Diameter : 40 mm / 1.5″ Installation Length : 300 mm Connection Threads : 1.5″ BSP Nominal Pressure – Threaded : 16 Bar Maximum Temperature : +130 or +180 Celcius Maximum Flow Rate : 9,000 lph Continuous Flow Rate : 6,000 lph Minimum Flow Rate : 225 lph Approx Starting Flowrate : 90 lph Maximum Permissible Error : ±1.0% of reading Smallest Readable Amount : 0.1 Litres Registration Capacity : 10,000 Litres Safety Filter Mesh Size : 800 Micron Dirt Filter Mesh Size : 600 Micron Volume of Measuring Chamber : 330 cm3 Ingress Protection : IP65 Ingress Protection :